EUROKOMAX ELECTRIC HORIZONTAL EARTH DRILL SET (400V/50HZ)
Electric horizontal earth drill set – 400V/50Hz
Earth drill can be used under the ground horizontally.
The drill head works in the ground and the engine assures its turning. The drilled earth will be removed out of the hole by the turning of the connected drill-bits. The soil will be taken out of the hole by a worker with a help of a shovel. Pushing forward the drill unit is done by forcing the pushing rod on the guide rail. Using additional drill-bits after each other the required length of the hole will be drilled.
- Motor power 2,2 kW
- Power supply 400V / 16A
The drill is very useful tool making the hole under the ground for electrical cables, water pipes and any kind of lines or networks. In this industry many times happened that these kind of works had to be done without breaking the surface or road. Without the right kind of tools huge additional costs, big problems can occur and delays in deadline.
Max. range of the earth drill is 15 m (with Ø130mm Drill Bit)
Drill-Bits (different diameters, each 1m long, attachable):
- dia. Ø 130 mm × 1m
- dia. Ø 200 mm × 1m
- dia. Ø 250 mm × 1m
The two-edges drill head helps to make the drilling precise and more efficient.
- Drill Heads – Ø 130, 200, 250 mm
To cut out the earth and transfer it to the drill-bits. Drill head has a low reacting force, two-edges, „butterfly head” and can be connected to any of the drill-bits. Length: 200-300 mm
It can be used in different type of soils, either a loose sandy soil, a hard clay surface or pebble ground.
Drilling speed is about 1m/1-2 minutes depending on soil conditions and operator.
- Guiding rail – 1 pc.
- Pushing rod – 1 pc.
- Spikes for fixing the rail – 4 pc.
- Drill Bit: diameter Ø130, Ø200, Ø250 mm (length 1m)
- Drill Head: diameter Ø130, Ø200, Ø250 mm (length 0,2-0,3m)
- Expand Drill Bit Ø300mm (length 0,6m)
- Motor power: 2,2kW
- Power supply: 400V/16A
- Drilling range max.: 15m
- Item no.: 30148