Orgoványi str. 34.
Budapest, Hungary




Horizontal earth drilling machines are the best, cost-effective solutions for drilling under roads or any other surface block without breaking them. It is the most efficient way to place the electrical cables, water, gas and sewage pipelines or any other required infrastructural facilities under the ground. The maximum drilling range is 15 m and they can be used in most type of grounds. Each drill-bit is 1 m long and they can be connected by their ends one by one as the drilling proceeds. The drill-bits can be ordered with diameters of 130, 200, 250 mm.

Some feature benefits of our drilling machine:
• Easy setting up and operation
• Fast and efficient working
• Simple but massive construction
• High quality, standardized electric components (electric version)
• Original HONDA engine (petrol version)
• Strong mechanical parts and frame


petrol engine

1. HONDA engine horizontal earth drill

We provide only the best quality parts to build the HONDA engine horizontal earth drill. The HONDA engine, the massive gearbox, the durable belt are the key elements of the drilling unit.

Engine data:
Honda GCV160 OHC
4,0 kW / 5,5 LE
Weight: 61 kg
unleaded petrol  95

petrol engine 2. Electric horizontal earth drill

The one-phase or three-phase electrical unit can work anywhere using the standard electric networks, power consumption: 12A, 230 or 400V/50Hz. If it is supplied from generator, it should be at least 3,5 kW output, 12A.

The generator must be placed far enough from the starting pit to avoid the exhaust gas filling the working area.

Engine data:
2,2 kW electric engine with gearbox
Weight: 46,5 kg
230 or 400 V/50Hz, 210Nm, 40 RPM





Guiding rail: The drilling unit moves forward and backwards on it. Fixed to the ground with spikes, see below.

Length: 1700 mm, Width: 400 mm, Height: 45 mm, Weight: 10,5 kg


Pushing rod: Assures the forward pushing.

Length: 1500 mm, Width: 400 mm, Diameter: 42 mm, Weight: 4,2 kg


Augers: Delivering the torque to the drilling bit and cleaning out the hole. Augers can be fixed to each other in different orders (changeable).

Length: 1000 mm, Diameter: 130, 200, 250 mm. Weight: 130 mm – 7,5 kg, 200 mm – 8,5 kg, 250 mm – 9,5 kg.


Drilling bits: To cut out the earth and transfer it to the augers. Drilling bit has a low reacting force, two-edges, „butterfly head” and can be connected to any of the augers. The two-edges drilling bit helps to make the drilling precise and more efficient.

Length: 200-300 mm, Diameter: 130, 200, 250 mm. Weight: 130 mm – 3 kg, 200 mm – 3,5 kg, 250 mm – 4 kg.


Spikes: It is to put down through the guiding rail into the ground in order to fix it and avoid the drill unit move away.

Length: 35 mm, Diameter: 10 mm, Weight: 0,5 kg


Cardan-shaft: Aligning (if it is necessary) the chuck and the augers during the drilling process.

Weight: 3,5 kg.


Use of Method

Earth drill can be used under the ground horizontally

The drill head works in the ground and the engine assures its turning. The drilled earth will be removed out of the hole by the turning of the connected drill-bits. The soil will be taken out of the hole by a worker with a help of a shovel. Pushing forward the drill unit is done by forcing the pushing rod on the guiding rail.  Using additional drill-bits after each other the required length of the hole will be drilled.


The drill is very useful tool to make a hole under the ground for electrical cables, water pipes and any kind of lines or networks. In this industry, it happens many time, that these kind of works had to be done without breaking the surface or road. Without the right kind of tools or huge additional costs, big problems can occur causing delays in deadline.
Max. range of the earth drill is 15 m.

It can be used in different type of soils, either a loose sandy soil, a hard clay surface or pebble ground.