EUROKOMAX HORIZONTAL EARTH DRILLS
Earth drilling machines are the best, cost-effective solution for horizontal drilling under roads or any other surface block without breaking them. Using an undergorund pipe drilling machine is the most efficient way to lay gas pipelines or counduit tubes for electric wires. Horizontal boring can also be a great way for plumber drilling under road to construct aqueduct, plumbing, sewage pipelines, or any other required infrastructural facilities under the ground. Horizontal earth drilling machines are excellent for drilling a ditch alongside the road that would help drain rain water to prevent road damage. The maximum drilling range is 15 m and they can be used in most type of grounds. Each drill-bit is 1 m long and they can be connected by their ends one by one as the drilling proceeds. The drill-bits can be ordered with diameters of 130, 200, 250 mm.
Some feature benefits of our drilling machine:
• Easy setting up and operation
• Fast and efficient working
• Simple but massive construction
• High quality, standardized electric components (electric version)
• Original HONDA engine (petrol version)
• Strong mechanical parts and frame
1. HONDA engine horizontal earth drill
We provide only the best quality parts to build the HONDA engine horizontal earth drill. The HONDA engine, the massive gearbox, the durable belt are the key elements of the drilling unit. Engine data: |
|
2. Electric horizontal earth drill
The one-phase or three-phase electrical unit can work anywhere using the standard electric networks, power consumption: 12A, 230 or 400V/50Hz. If it is supplied from generator, it should be at least 3,5 kW output, 12A. The generator must be placed far enough from the starting pit to avoid the exhaust gas filling the working area. Engine data: |
Guiding rail: The drilling unit moves forward and backwards on it. Fixed to the ground with spikes, see below. Length: 1700 mm, Width: 400 mm, Height: 45 mm, Weight: 10,5 kg |
|
Pushing rod: Assures the forward pushing. Length: 1500 mm, Width: 400 mm, Diameter: 42 mm, Weight: 4,2 kg |
|
Augers: Delivering the torque to the drilling bit and cleaning out the hole. Augers can be fixed to each other in different orders (changeable). Length: 1000 mm, Diameter: 130, 200, 250 mm. Weight: 130 mm – 7,5 kg, 200 mm – 8,5 kg, 250 mm – 9,5 kg. |
|
Drilling bits: To cut out the earth and transfer it to the augers. Drilling bit has a low reacting force, two-edges, „butterfly head” and can be connected to any of the augers. The two-edges drilling bit helps to make the drilling precise and more efficient. Length: 200-300 mm, Diameter: 130, 200, 250 mm. Weight: 130 mm – 3 kg, 200 mm – 3,5 kg, 250 mm – 4 kg. |
|
Spikes: It is to put down through the guiding rail into the ground in order to fix it and avoid the drill unit move away. Length: 35 mm, Diameter: 10 mm, Weight: 0,5 kg |
|
Cardan-shaft: Aligning (if it is necessary) the chuck and the augers during the drilling process. Weight: 3,5 kg. |
Use of Method
Earth drill can be used under the ground horizontally
The drill head works in the ground and the engine assures its turning. The drilled earth will be removed out of the hole by the turning of the connected drill-bits. The soil will be taken out of the hole by a worker with a help of a shovel. Pushing forward the drill unit is done by forcing the pushing rod on the guiding rail. Using additional drill-bits after each other the required length of the hole will be drilled.
Applications
The drill is very useful tool to make a hole under the ground for electrical cables, water pipes and any kind of lines or networks. In this industry, it happens many time, that these kind of works had to be done without breaking the surface or road. Without the right kind of tools or huge additional costs, big problems can occur causing delays in deadline.
Max. range of the earth drill is 15 m.
It can be used in different type of soils, either a loose sandy soil, a hard clay surface or pebble ground.
All the mentioned prices are net prices, not including the Hungarian VAT (27%) and shipping costs (ex works, Budapest). EUROKOMAX KFT reserves the right to change prices without prior notice.
-
AUGER Ø250MM×1M FOR EUROKOMAX EARTH DRILL MACHINES
169€ Add to cart -
AUGER Ø200MM×1M FOR EUROKOMAX EARTH DRILL MACHINES
158€ Add to cart -
AUGER Ø130MM×1M FOR EUROKOMAX EARTH DRILL MACHINES
146€ Add to cart -
DRILLING BIT Ø250MM FOR EUROKOMAX EARTH DRILL MACHINES
78€ Add to cart -
DRILLING BIT Ø200MM FOR EUROKOMAX EARTH DRILL MACHINES
76€ Add to cart -
DRILLING BIT Ø130MM FOR EUROKOMAX EARTH DRILL MACHINES
74€ Add to cart